YZ27 series four-column single-acting thin plate stamping hydraulic press

Hydraulic presses are beneficial in that they offer greater versatility with its variable stroke length, die space, and pressure. The custom hydraulic press is often the best choice when producing parts with deep, complex forms that require a lot of material flow and are not dependent on production speed.
Parts such as tanks, cylinders, and bowl shapes, as well as parts that require a “dwell” at the bottom of the stroke (including plastics), are often run on hydraulic presses. Characteristics of a typical hydraulic press:
variable stroke length
slide motion and position control throughout the range of the stroke length
variable slide velocity, even within a single cycle of the press (typically configured as fast approach, slow press, fast return)
full working energy at any speed
full press capacity at any point in the stroke
adjustability of all the above
in general, slower than a mechanical or servo press
in general, lower accuracy and repeatability than a mechanical or servo press
relatively low initial cost

Your peace of mind is our priority! When you purchase a customized machine from ZHIBO, we’ll design a warranty program that includes coverage on any defective parts, as well as the labor required to repair them! For more details, contact us today!

Lead times vary depending upon machine size, scope of your application, and demand. Naturally, standard equipment has shorter lead times than customized solutions. We encourage you to contact us to access an accurate lead time of your desired equipment.

There are three good reasons that hydraulic presses are the most common in use:
1、Their design makes them the most efficient.
2、They are dependable, the workhorses of manufacturing.
3、The level of force they reach can’t be duplicated with mechanical or pneumatic presses.

Please give us a call or send us an email! Our experts will ask you a variety of questions to help determine what style, tonnage, and press options are necessary to meet your goals. Please be ready to provide information on your intended application, material, and what (if any) type of equipment you are using to achieve your application presently. We are happy to visit your business as required to fully understand your business’ needs.

Auto manufacturers have many uses for the hydraulic press. The main use is in the manufacture of car parts. They can use hydraulic presses to manufacture large parts such as body panels and brake pads as well as smaller parts such a clutches and even more complex auto parts.

Disadvantages of Hydraulic Press: The Pressure is regulated at a certain level and can not exceed more than that. Some hydraulic fluids are flammable. More maintenance is required. There is a carbon footprint. There is a possibility of Hydraulic fluid leakage. The operational speed is low. They consume high energy.

The popular use of hydraulic presses in manufacturing is due to their ability to apply substantial compressive force to billets to flatten, shape, straighten, stamp, and bend the billets into designs and various forms.